First you must know what working range the concrete laser screed machine can work in. The most suitable leveling machine is then selected according to the different materials and thicknesses. When choosing this, try not to select materials or thickness that exceeds or falls below the working range of the laser screed. Because it is easy to cause some wear on the red shaft or mechanical material of the leveling machine itself, causing unnecessary mechanical failure. And the election of inappropriate materials will also make the flatness of the ground less than required, and the machine itself will reduce the life of the machine itself, etc. The best thing is to choose the right machinery and the right engineering materials.

HIKING Laser screed

HIKING Laser screed

The second point is to know the installation method of the laser leveling machine drum, determine the arrangement of the drum, choose the best way to place material for your machine. Because some of the material outlets of concrete laser screed machine are on the top, while others are on the side. Therefore, the most important thing is to select the  best way to place material that is most suitable for your own concrete laser screed machine according to the way the drum travels. In general, the direction of the drum and the feed are reversed, so that the groove head can better push the material into the ground.

HIKING Laser screed

HIKING Laser screed

The third point is that the laser screed needs to be cleaned regularly after using the machine. The service life of the mechanical equipment is completely in line with the working mode and the maintenance after work, so the laser screed must be cleaned after the work is completed. First of all, the mechanical leveling parts are cleaned, especially those parts that are exposed to the outside of the machine and are prone to rust. The best thing is to apply it with butter to make sure he doesn’t rust easily. There is a lot of gear chains in the machine, and regular lubrication must be done. Only in this way can your machinery be used better. It is important to note that the machine needs to be shut down during cleaning.

If you need the laser screed machine, please check “Laser screed for sale