Besides the two-wheeled walk-behind laser screed and the four-wheeled ride-on laser screed, the six-wheeled ride on laser screed is a relatively common type of machine in the current market. And this kind of product has a relatively lower-end positioning, and this kind of product is researched and developed in order to cater to those clients who are lacking in capital but in need of hydraulic machines. Now the characteristics of the six-wheeled ride on laser screed are summarized as follows:
The structural features of the six-wheeled ride on laser screed
The six-wheeled ride on laser screed has adopted the integrated design, at least that we have already introduced the articulated design of the four-wheeled laser screed and its advantages(The advantage of the ride on concrete laser screed in articulated design). And this kind of design was firstly adopted by the Spanish Maini company, and it is characterized by steering the direction with the rear wheels and providing the power with the front wheels. Because that only two wheels can provide power, so when the concrete is relatively thicker, mobility limitation caused by power shortage will be a possible problem. And the rear wheels bear the weight of the whole machine with the addition of the concrete resistance, so the steering system of this machine is easier to break down. Also, the operation flexibility of it is not high, so it can not operate flexibly in the concrete.
The dynamical system of the six-wheeled ride on laser screed
Because that the six-wheeled ride on laser screed is positioned as a lower-end product, so in most of the time, it will adopt engines such as Honda gx690/620 from Japan or the lower-powered engine of Subaru, these kind of engines are mostly applied in some miniaturized mechanical products, so it can not provide robust dynamic power for these machines, and the hydraulic system of this machine is driven by the 12cc hydraulic pump, which is one times smaller than the 31 horsepower Quantum engine and the 28cc Rexroth hydraulic pump(s840-2 laser screed for sale) which are applied in the four-wheeled laser screed in our company, so the six-wheeled ride on laser screed can not be used in some constructions with relatively thicker concrete.
It is inconvenient in maintenance, and it is quite easier to break down. Also, the unreasonability in structural design may result to later inconvenient maintenance.
At the present stage, my company haven’t produced this kind of lower-end product yet, and the main reason for that is that the failure rate of this kind of laser screed is too high, and its latter after-sales service is troublesome. In the meantime, although the client purchases this kind of machine at a low price, the extremely unsatisfying later use will also make the purchase meaningless.
If you want to buy the laser screed, you can check the “Laser screed for sale” to find the right machine to you.