For the machine, it detects the ground through its own various equipment and then performs the necessary processing. His own machinery consists of many parts. The simplest one is the ray launcher, and the high-frequency oscillating machine. The most critical must be the engine he wears, and the design of the entire machine, which requires specialized personnel to analyze. Next, let me give you a brief introduction about which equipment components should be looked at to determine the price.
For mechanical equipment, if his own engine is big enough, it may work faster than the average machine. But for this laser screed, he doesn’t need his own engine power too much. Because his own engine is usually only used for simple walking, you can watch his engine when you choose. Try to choose a medium-sized engine when purchasing, which is cheap and practical.
The second point is the oscillating machine or the oscillating motor on the concrete laser screed machine. Because it is used to vibrate to adjust the flatness and hardness of the concrete floor, there is not much demand for the engine itself. However, there are higher requirements for using a motor or machine that is shocked. Because only high-powered oscillating instruments or motors can achieve the desired density of the ground, the required quality can be achieved after the cement has hardened. When choosing here, you need to follow the professional introduction of the professional and then choose a shock motor or shock machine suitable for your own construction site.
The third point is the measurement error of the flatness of the laser screed in the plane. Because the laser screed is used for leveling, you need to pay attention to this aspect. You need to choose an instrument that has as high a level of laser measurement as possible depending on the equipment. In order to make you better deal with some big projects. Of course, the price will be higher when the instrument selection is higher.